Trenutno se nalazite: Proizvodi> Kemijsko - tehnički proizvodi> Elektro-kemikalije> Ljepila za elektroniku
LJEPILA ZA ELEKTRONIKU
Adhesives for electronics by Panacol
The Panacol product line of Elecolit® conductive adhesives are both electrically and thermally conductive adhesives. Elecolit® conductive adhesives contain metallic filling materials, primarily ...
ELECTOLUBE RCS
Electrolube RCS - Rapid Cure Sealant - is a single component, solvent-free, low odour RTV which cures upon exposure to atmospheric moisture. The product offers high bond strength when applied ...
ELECTROLUBE ES807 SMD Adhesive
Electrolube ES 807 is designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering. It is particularly suited for applications where medium to high ...
ELECTROLUBE ES808 SMD Adhesive
Electrolube ES 808 is designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering. It is particularly suited for pin transfer and stencil print ...
PANACOL Elecolit 3012
Electrically Conductive Adhesive | Dispenser, Screen Printing, Good Conductivity, Good Gap Filling Capacity
PANACOL Elecolit 3024
Electrically Conductive Adhesive | Snap Cure at High Temperatures, Pot Life: 8 h, Cures at as Low as 80 °C
PANACOL Elecolit 3025
Electrically Conductive Adhesive | Curing at RT Possible, Short Production Time at High Temperatures, Dispensable, Screen Printable
PANACOL Elecolit 3036
Electrically Conductive Adhesive | Curing at RT Possible, Short Production Time at High Temperatures, Dispensable, Screen Printable, Alternative to El 3025
PANACOL Elecolit 3043
Electrically Conductive Adhesive | Very low Viscosity, Good Dispensability, Small Fillers Ag<10 μ, Low Ion Content
PANACOL Elecolit 3061
Anisotropically Conductive Adhesive | Anisotropic Electrically Conductive, Ion Pureness < 10 ppm
PANACOL Elecolit 3063
Anisotropically Conductive Adhesive | Anisotropic, UV-Curing, for Transparent Film with Printed Conductive Paths, Highly Flexible
PANACOL Elecolit 3064
Anisotropically Conductive Adhesive | Anisotropic, UV-Curing, for Transparent Film with Printed Conductive Paths, Highly Flexible, Alternative to El 3063
PANACOL Elecolit 3065
Anisotropically Conductive Adhesive | Anisotropic, UV and Heat Curing, for Transparent Film with Printed Conductive Paths, Highly Flexible, Dual Curable for Bigger Connector Sizes
PANACOL Elecolit 323
Electrically Conductive Adhesive | Pot Life 96 hours, Cures at Low Temperatures, Suitable for Semiconductors, Good Dispensability
PANACOL Elecolit 325
Electrically Conductive Adhesive | Short Times at High Temper., Dispensers, Printing and Screen Printing, Very Good Conductivity
PANACOL Elecolit 327
Electrically Conductive Adhesive | High Electrical & Thermal Conductivity, Good on Gold, Aluminium, Tanatal, Germanium and Ceramics
PANACOL Elecolit 336
Electrically Conductive Adhesive | Cures at Room and Low Temperatures, Dispenser, Printing and Screen Printing, Inexpensive
PANACOL Elecolit 342
Electrically Conductive Adhesive | Latex-like Film, Low Mechanical Strength, Good Adhesion to Many Substrates, Curing at Room Temp. Possible
PANACOL Elecolit 3653
Elecolit® 3653 is a silver-filled, solvent-free, one-part, electrically and thermally conductive epoxy adhesive. It is used in applications that are subject to vibrations or rapid temperature ...
PANACOL Elecolit 3655
Electrically Conductive Adhesive | Dispensable, Small Filler Grain Size (<10μm), High Thermal Conductivity, High Electrical Conductivity
PANACOL Elecolit 414
Electrically Conductive Adhesive | Extremely Flexible, Very Good Conductivity, Can be Bonded and Crumpled, Abrasion-Proof
PANACOL Elecolit 6207
Thermally Conductive Adhesive | Low Viscosity, Flame-Retardant, Low Shrinkage, Pot Life 2 hours, UL 94 Vo
PANACOL Elecolit 6601
Thermally Conductive Adhesive | Very Good Adhesion to Metals, Good Flow Behaviour, High Strength, Good Dispensability
PANACOL Elecolit 6603
Thermally Conductive Adhesive | Somewhat Flexible, Impact- and Temperature Resistant, High Viscosity
PANACOL Elecolit 6604
Thermally Conductive Adhesive | Low Heat Expansion, Good Measured Value Transmission, High Viscosity
PANACOL Elecolit 6607
Elecolit® 6607 is a one component, thermally conductive adhesive with excellent metal bonding. Elecolit® 6607 can be cured at 80°C within one hour. It can be processed via dispenser, screen ...
PANACOL Elecolit 6616
Thermally Conductive Adhesive | Pot Life 45 min, Flexible at Low Temperatures, Vibration- and Impact-Resistant, Visco-Plastic
PANACOL Structalit 5604
Thermal Curing Epoxy, Suitable for Reflow Process, Low Outgassing
PANACOL Structalit 5605
Fast Curing at Low Temperature, Screen Printable, Suitable for Reflow
PANACOL Structalit 5800
Low Shrinkage, High Temperature, Chemical and Moisture Resistance
PANACOL Structalit 5810
Flexible Adhesive and Sealant | Good Adhesion to Plastics, Impact Resistant
PANACOL Structalit 5820
Hard High Strength Adhesive
PANACOL Structalit 5830
Ferrite Bonding | Elastic, High Strength, Impact Resistant
PANACOL Structalit 5845
Flexible Sealant, Filled, Good Flexibility
PANACOL Structalit 5890
Excellent Thermal Conductivity, Fast Curing
PANACOL Structalit 5891
Curable Wet-in-Wet with Filler (St. 5893), Good Edge Stability and Impact Resistance
PANACOL Structalit 5892
Short Curing Times, Good Impact Resistance, Dimensionally Stable at High Curing Temperature
PANACOL Structalit 5893
Good Flow Characteristic, Can be used Wet-in-Wet with Dam Material (St. 5891), Good Impact Resistance
PANACOL Structalit 5894
Good Impact Resistance
PANACOL Structalit 701
Good Ingress in Fibre Bundles, Autoclavable
PANACOL Structalit 8801
Good Chemical Resistance, High Tensile Strength, Well Suited for Parts with Similar CTE, Limited Material Flow before Hardening
PANACOL Structalit 8804
Good Chemical Resistance, High Tensile Strength, Well Suited for Parts with Similar CTE, Limited Material Flow before Hardening
PANACOL Structalit 8805
Good Chemical Resistance, High Tensile Strength, Well Suited for Parts with Similar CTE, Limited Material Flow before Hardening
PANACOL Vitralit 1517 Optic
Typical Applications: Lens Fixation, Optical Application and Builidings Viscosity (mPas): 90,000 - 120,000 Temperat. Resist. (ºC): -40 to +180 Curing: UV / Thermal ...
PANACOL Vitralit 1600 LV Smart Card
Typical Applications: Glob-Top Sealant for Larger Chips Viscosity (mPas): 5,000 - 6,000 Temperat. Resist. (ºC): -40 to +180 Curing: UV / Thermal Color: Grey ...
PANACOL Vitralit 1605 UV curable epoxy resin
Vitralit® 1605 is a UV-curable epoxy resin. As a special feature Vitralit® 1605 has a thermal initiator, which enables subsequent curing of shadow areas. Vitralit® 1605 is characterized by a very ...
PANACOL Vitralit 1650 Smart Card
Typical Applications: Glob-Top, Covering of Small Dies Viscosity (mPas): 6,000 - 9,000 Temperat. Resist. (ºC): -40 to +150 Curing: UV Color: Grey Characteristics: ...
PANACOL Vitralit 1657 Electronic Adhesive
Typical Applications: Glob-Top Sealant for Large/High Parts Viscosity (mPas): 120,000 - 130,000 Temperat. Resist. (ºC): -50 to +150 Curing: UV Color: Light Grey ...
PANACOL Vitralit 1671 Smart Card
Typical Applications: Dam Compound Viscosity (mPas): 250,000 - 300,000 Temperat. Resist. (ºC): -40 to +180 Curing: UV / Thermal Color: Grey Characteristics: ...
PANACOL Vitralit 1680 Smart Card
Typical Applications: Glob-Top, Covering of Small Dies Viscosity (mPas): 6,000 - 9,000 Temperat. Resist. (ºC): -40 to +150 Curing: UV Color: Grey Characteristics: ...
PANACOL Vitralit 1688 Smart Card
Typical Applications: Glob-Top, Covering of Small Dies Viscosity (mPas): 3,000 - 4,000 Temperat. Resist. (ºC): -40 to +150 Curing: UV Color: Grey Characteristics: ...
PANACOL Vitralit 1691 Electronic Adhesive
Typical Applications: Glob-Top Viscosity (mPas): 280,000 - 310,000 Temperat. Resist. (ºC): -40 to +180 Curing: UV / Thermal Color: Black Characteristics: High Ion ...
PANACOL Vitralit 1702 Medical Equipment
Typical Applications: Medical Plastics Bonding, USP Class VI Viscosity (mPas): 45 - 80 Temperat. Resist. (ºC): -55 to +135 Curing: UV Color: Amber Characteristics: ...
PANACOL Vitralit 1722 Potting
Typical Applications: Sealing of Plugs, Switches and Relays, Parts on FR4 Viscosity (mPas): 5,000 - 8,000 Temperat. Resist. (ºC): -40 to +120 Curing: UV Color: Pink ...
PANACOL Vitralit 2008 Dome Coating
Typical Applications: Decorative Anti Scratch Coating, Dome Coating Viscosity (mPas): 200 - 300 Temperat. Resist. (ºC): -40 to +180 Curing: UV / Thermal Color: Clear, ...
PANACOL Vitralit 2009 F Electronic Adhesive
Typical Applications: Conformal Coating Viscosity (mPas): 100 - 200 Temperat. Resist. (ºC): -40 to +180 Curing: UV / Thermal Color: Transparent Characteristics: ...
PANACOL Vitralit 2020 Dome Coating
Typical Applications: Dome Coating Epoxy Based Viscosity (mPas): 200 - 400 Temperat. Resist. (ºC): -40 to +160 Curing: UV Color: Clear, Colorless Characteristics: ...
PANACOL Vitralit 2655 Electronic Adhesive
Typical Applications: Flip-Chip Underfiller Viscosity (mPas): 200 - 400 Temperat. Resist. (ºC): -50 to +150 Curing: UV / Thermal Color: Transparent Characteristics: ...
PANACOL Vitralit 2665 Electronic Adhesive
Typical Applications: Flip-Chip Underfiller Viscosity (mPas): 3,000 - 5,000 Temperat. Resist. (ºC): -55 to +175 Curing: UV / Thermal Color: Transparent ...
PANACOL Vitralit 4282 mod/2 Metal Bonding
Typical Applications: Ferrite Bonding, Screw and Threadlocking Adhesive Viscosity (mPas): 500 - 600 Temperat. Resist. (ºC): -40 to +170 Curing: UV / Activator ...
PANACOL Vitralit 4451 Electronic Adhesive
Typical Applications: Conformal Coating, Foil bonding Viscosity (mPas): 600 - 800 Temperat. Resist. (ºC): -40 to +130 Curing: UV Color: Transparent ...
PANACOL Vitralit 4731 Plastic Bonder
Typical Applications: PMMA, PC and Glass Surface Bonding Viscosity (mPas): 900 - 1,500 Temperat. Resist. (ºC): -40 to +120 Curing: UV / VL Color: Clear, Colorless ...
PANACOL Vitralit 4731 VT Plastic Bonder
Typical Applications: PMMA, PC and Glass Surface Bonding Viscosity (mPas): 22,000 - 28,000 Temperat. Resist. (ºC): -40 to +120 Curing: UV / VL Color: Clear, Colorless ...
PANACOL Vitralit 4732 VT Electronic Adhesive
Typical Applications: Corner Bonding, Potting, Mounting Large Parts on PCB Viscosity (mPas): 30,000 - 40,000 Temperat. Resist. (ºC): -40 to +120 Curing: UV / VL ...
PANACOL Vitralit 5607 SMD
Typical Applications: UV Fixation of SMD Parts Viscosity (mPas): 1,000,000 - 2,000,000 Temperat. Resist. (ºC): -40 to +150 Curing: UV / Thermal + Activ. Color: Red ...
PANACOL Vitralit 6104 Potting
Typical Applications: Sealing Rotors and Sensors Viscosity (mPas): 3,500 - 6,000 Temperat. Resist. (ºC): -40 to +200 Curing: UV / Thermal Color: Translucent ...
PANACOL Vitralit 6104 VT Electronic Adhesive
Typical Applications: Corner Bonding, Mounting Large Parts on PCB Viscosity (mPas): 75,000 - 90,000 Temperat. Resist. (ºC): -40 to +200 Curing: UV / Thermal ...
PANACOL Vitralit 6108 T Medical Equipment
Typical Applications: For Glass/Metal, USP Class VI, ISO 10993 Viscosity (mPas): 4,000 - 6,000 Temperat. Resist. (ºC): -40 to +160 Curing: UV/VL/Therm. + Activ. ...
PANACOL Vitralit 6125 Metal Bonding
Typical Applications: First Fixation of Metall Viscosity (mPas): 4,000 - 6,000 Temperat. Resist. (ºC): -40 to +150 Curing: UV / Therm./ Aktivator Color: Translucent ...
PANACOL Vitralit 6128 o.A. Glass Bonding
Typical Applications: Glass-Metal/Stone/Marble, Thermoplastic Materials Viscosity (mPas): 100 - 300 Temperat. Resist. (ºC): -40 to +150 Curing: UV / Thermal + Activ. ...
PANACOL Vitralit 6128 Potting
Typical Applications: Adhesive/Sealant for Switches, Plugs, Relays Viscosity (mPas): 800 - 1,200 Temperat. Resist. (ºC): -40 to +150 Curing: UV / Therm. + Activ. ...
PANACOL Vitralit 6133 Glass Bonding
Typical Applications: Glass-Metal/Stone, Lamin./Temp. Glass-Metal, Hard Mat. Viscosity (mPas): 600 - 1,000 Temperat. Resist. (ºC): -20 to +130 Curing: UV / VL ...
PANACOL Vitralit 6137 Electronic Adhesive
Typical Applications: Die-Attach, Heat Sink Bonding, Thermally Conductive Viscosity (mPas): 150,000 - 170,000 Temperat. Resist. (ºC): -40 to +180 Curing: UV / Thermal ...
PANACOL Vitralit 7041 F Medical Equipment
Typical Applications: Needle Bonder, Connect. of Tubes, Fitting and Housings Made of Plastics Viscosity (mPas): 50 - 90 Temperat. Resist. (ºC): -40 to +120 Curing: UV / VL ...
PANACOL Vitralit 7561 Glass Bonding
Typical Applications: Humidity Resistant Glass Bonder, Solar Modules Viscosity (mPas): 500 - 850 Temperat. Resist. (ºC): -50 to +150 Curing: UV Color: Clear, ...
PANACOL Vitralit 7562 Glass Bonding
Typical Applications: Glass/PC, Glass/Laminated Glass/Tempered Glass Viscosity (mPas): 500 - 800 Temperat. Resist. (ºC): -40 to +150 Curing: UV / VL Color: Clear, ...
PANACOL Vitralit 7641 Plastic Bonder
Typical Applications: PMMA and PC Edge-to-Edge Bonding Viscosity (mPas): 50 - 100 Temperat. Resist. (ºC): -30 to +120 Curing: UV / VL Color: Clear, Colorless ...
PANACOL Vitralit 9181 Wire Tacking
Typical Applications: Wire tacking, Bonding and Sealing Electric. Compon. Viscosity (mPas): 4,000 - 7,000 Temperat. Resist. (ºC): -40 to +150 Curing: UV / VL ...
PANACOL Vitralit UC 1608 Optic
Typical Applications: Fiber Optics, Lenses, Optical Application Viscosity (mPas): 700 - 1,250 Temperat. Resist. (ºC): -40 to +175 Curing: UV / Thermal ...
PANACOL Vitralit UC 2017 Potting
Typical Applications: Sealing of Plugs, Switches and Relays, Fixing Parts Viscosity (mPas): 14,000 - 22,000 Temperat. Resist. (ºC): -40 to +150 Curing: UV ...
PANACOL Vitralit UC 6215 Optic
Typical Applications: Bonding, Sealing, Encapsulating Electrical Parts Viscosity (mPas): 600 - 1,500 Temperat. Resist. (ºC): -40 to +180 Curing: UV Color: Clear, ...
PANACOL Vitralit UD 5134 Potting
Typical Applications: Bonding, Sealing, Encapsulating Electrical Parts Viscosity (mPas): 15,000 - 25,000 Temperat. Resist. (ºC): -40 to +150 Curing: UV / Thermal ...
PANACOL Vitralit UD 8559 LV Potting
Typical Applications: Plugs, Relays and Connector Sealing and Potting Viscosity (mPas): 700 - 1,000 Temperat. Resist. (ºC): -20 to +120 Curing: UV/VL + Humidity ...
PANACOL Vitralit UV 2113 Wire Tacking
Typical Applications: Thermoplastics Viscosity (mPas): 19,000 - 32,000 Temperat. Resist. (ºC): -40 to +150 Curing: UV / VL Color: Grey-Yellow Characteristics: Good ...
PANACOL Vitralit UV 2725 Glass Bonding
Typical Applications: Large-Surface Glass-Glass/Metal/Stone Viscosity (mPas): 200 - 400 Temperat. Resist. (ºC): -20 to +140 Curing: UV Color: Clear, Colorless ...
PANACOL Vitralit UV 2771 Glass Bonding
Typical Applications: Hard Glass-Glass/Metal (Alu/St. Steel), Temp./Lam. Glass Viscosity (mPas): 2,000 - 3,500 Temperat. Resist. (ºC): -20 to +120 Curing: UV / VL ...
PANACOL Vitralit UV 3675 Dome Coating
Typical Applications: Dome Coating Epoxy Based Viscosity (mPas): 150 - 250 Temperat. Resist. (ºC): -40 to +120 Curing: UV / VL Color: Clear, Colorless ...
PANACOL Vitralit VBB-1 Plastic Bonder
Typical Applications: Glass Bevel Bonds, Elast. Edge-to-Edge Bondig, Plastics/Glass Viscosity (mPas): 1,000 - 1,500 Temperat. Resist. (ºC): -50 to +150 Curing: UV / VL ...
PANACOL Vitralit VBB-N Glass Bonding
Typical Applications: Bevelbonder, Optical Filter, Suitable for Bonding Large Glass Areas Viscosity (mPas): 50 - 150 Temperat. Resist. (ºC): -40 to +140 Curing: UV / VL ...
Three Bond 2217H
The products Three Bond 2217H is an onecomponent epoxy resin, which have been specially developed for surface mounting, in order to keep the components in position on the printed circuit boards ...
Three Bond 2217L
Three Bond 2217L is one-component epoxy resin, which has been specially developed for surface mounting, in order to keep the components in position on the printed circuit boards during the placement ...
Three Bond 2274
The product Three Bond 2274 is a one-component epoxy resin which has been specially developed for surface mounting, in order to keep the components in position on the printed circuit boards during ...
ThreeBond 2271G
The product Three Bond 2271G is an one-component epoxy resin, which has been specially developed to provide Non Conductive Paste for Flip Chip bonding process. Features: Fast cure (for example ...