Select your country

TECHCON TS9200 D Series Jet Tech Valve

EN AT DE CZ HU SI SK HR 


Techcon Systems

TECHCON TS9200 D SERIES JET TECH VALVE

TECHCON TS9200 D Series Jet Tech Valve

Pošalji upit za ovaj proizvod!
The TS9200D Jet Tech is a non-contact dispense valve capable of jetting fluid viscosities to 400,000 Cps. Jet Tech offers a fast jetting action producing hundreds of precise droplets in less than one second. The main feature of the valve is a single, easily replaceable diaphragm to eliminate dynamic fluid seals found in other jet valves.  No longer is it necessary to disassemble, clean and replace worn seals, which translates into saving time and money.  The diaphragm also allows fast cycle rates because of its very small mass.  There is no large sliding valve stem that slows down the process.   With this novel diaphragm design, the energy needed to eject a drop can be adjusted providing a wider process window.

Features:
  • No fluid seals to clean or replace
  • Up to 300 drops/ sec
  • Outstanding repeatabilty
  • Viscosities up to 400K cps
  • Drops as small as 10nl
  • Integral heater with minimal fluid heated
  • Tungsten carbide internal components for long life
  • Quick and simple maintenance

Specifications:
  • Size Width: 50.8mm (2.00")
  • Size Depth: 93.8mm (3.69")
  • Size Height: 88.9mm (3.50")
  • Weight: 348g (0.77lb)
  • Speed: Up to 300Hz Continuous Duty
  • Syringe Capacity: 5, 10, 30 and 55cc
  • Minimum Shot Size: 10nl
  • Viscosity Range: 1 to 400K Cps.
  • Fluid Pressure: 40 psi(2.76 bar)
  • Nozzle Sizes: 100µm, 125µm, 150µm, 200µm
  • Jet Pressure: 35psi to 70psi (2.41 to 4.8 bar)
  • Controller Interface: RS-232 & LCD Display w/ Interface
  • Input/ Output: TTL Level Triggers
  • Operating Temperature: 10 to 50ºC

Applications:
The TS900D Jet Tech can be used in wide range of applications. Some examples of processes and applications are:

  • Jetting silver epoxies for die bonding processes
  • Jetting silicone phosphor in the LED assembly process
  • Jetting under-fill in micro-electronic package applications on PCBA
  • Jetting micro dots of UV adhesive in medical device applications

Pošalji upit za ovaj proizvod!

TECHCON TS9200 D SERIES JET TECH VALVE




Hvala na Vašem upitu! Odgovorit ćemo Vam u najkraćem mogućem vremenu!

© Copyright 2024 Ulbrich Group
HomeProizvodinovostidownloadVideopartnerio poduzećukazalo stranicadisclaimeruvjeti poslovanjaKolačićiISO CertifikatQuality policyPrivacy Policy
Na vrh
https://www.ulbrich.hr/,https://dir.ulbrich.si/,cro
Koristimo kolačiće koji nam pomažu sa statistikom kako bi vaše iskustvo ovdje bilo jedno od najboljih. Ako vam nisu po ukusu, možete ih onemogućiti. Međutim, ako nastavite pregledavati stranicu bez promjene postavki, razumjet ćemo da u potpunosti pristajete na korištenje kolačića.
Postavke kolačićaNASTAVITE PREGLED STRANICE
POSTAVKE KOLAČIĆA

Također koristimo kolačiće koji nam pomažu sa statistikom kako bismo vaše iskustvo ovdje učinili jednim od najboljih. Ali ne brinite - domaće su.
Više o tome možete pročitati u Obavijest o kolačićima, a možete ih isključiti ili uključiti u nastavku.




SPREMI POSTAVKE